OTOT-1000C 1310nm CATV Broadcast Optical Transmitter
FEATURES
- Available enhanced RF bandwidth of 48-1,000 MHz supports most analog and QAM digital broadcast transport applications.
- Wide range of 2 mW to 31 mW DFB laser options for Tx launch powers from 3 dBm to 15 dBm.
- Unsurpassed noise and distortion performance at all optical powers.
- External RF and optical test points facilitate optical circuit set-up and maintenance.
- Field-configurable front or rear panel SC/APC optical output connector. (FC/APC optional)
- Self-contained, low profile, rugged flange mount cast aluminum housing.
- Optional 19” EIA rackmount kit for up to three (3) transmitters on a 1RU (1.75” high) chassis panel.
- Low power consumption, runs cool, integrated 90-240VAC power supply. (24VDC optional)
PRODUCT DESCRIPTION
The Olson Technology, Inc. Model OTOT-1000C 1310nm, 48-1,000MHz high-performance CATV Broadcast Transmitter is a high quality, full-featured standalone or 1RU 19" optical transmitter. Designed for optical transport of analog and QAM digital broadcast signals, the transmitter is ideal for CATV Hybrid Fiber Coax (HFC) applications, as well as direct transmission of CATV RF signals in industrial, corporate, gov’t, educational, and other applications.
The Model OTOT-1000C transmitter uses state-of-the-art RF and optical component technology. A comprehensive lineup of DFB laser offerings provides superior performance over a wide range of optical budgets (up to 16dB of loss), allowing unrepeatered spans of over 45km (28 miles) when used in conjunction with high performance, high sensitivity node receivers such as the Olson Technology Model OTPN-2000C or OTMN-II. Less demanding applications can operate to 25dB of loss or 70km (43 miles) distance.
The rugged, self-contained cast aluminum OTOT-1000C provides exterior RF input and optical output connections, plus front panel RF and laser test points. The field-configurable SC/APC (or optional FC/APC) connector can be mounted on the front or rear panel of the unit. The OTOT-1000C is cooled with forced air via an external high MTBF fan designed to be field-replaceable without interrupting operation. The standalone unit can be rackmounted using the Model OTLL-RMKIT-1 to mount up to three OTOT-1000C’s in a 1RU space.
|
